PROJECT 2 VIDEO

 





Comments

Post a Comment

Popular posts from this blog

PROJRCT 2 - DYNAMO STUDY

Image
Overview Project 2 builds on my Project 1 by adding Dynamo-controlled project-level parameters. These parameters achieve two main objectives: Southern Canopy: Sun-Driven Louvers Adding sun-driven louvers under the southern canopy roof modules, which cover open spaces. Northern Canopy: Room Function-Driven Adaptive Facade Implementing room function-driven adaptive facade modules under the northern canopy, covering enclosed spaces.
Read more

PARAMETRIC MASS – CANOPY

Image
PARAMETRIC MASS – CANOPY To achieve the parametric design of the canopy, it is necessary to start with the dimensions and positional relationships of the modules that make up the canopy. Each module consists of a roof and a tree-shaped column, and there are dimensional relationships and constraints between these two components as well. Thus, the parametric canopy is structured into three levels of families: Column Family – Module Family – Canopy Family . 1. Column Family: 1.1 Four-pronged Columns Family: a. Using the Column Template , rather than a Mass Template, since mass cannot be designated as structural components in the Revit project. b. The profile of one branch of the column is drawn on a vertical reference plane. The profile includes the following parameters: Lower Part Height : The height of the column's vertical section. Lower Part Height Outer = Column Height - 600 : The outer height of the vertical section. Upper Part Height : The height of the column’s in...
Read more